ENA Series Network Analyzer

• Various test set selection: 9 kHz to 20 GHz, 2- or 4-port
• Low trace noise: 0.004 dB rms @ 70 kHz IFBW
• Wide dynamic range: > 123 dB
• Fast measurement speed: 8 msec @ full 2-port cal, 401 points

ENA Series Network Analyzer

• 300 kHz to 3 GHz
• 120 dB dynamic range and 0.005 dB rms trace noise
• Built-in Visual Basic® for Applications (VBA)

RF Signal Generator

• 9 kHz to 3 GHz CW output, 20 Hz to 80 kHz low frequency O/P
• -127 to +13 dBm output level range (maximum +20 dBm settable)
• -95 dBc/Hz SSB phase noise

Signal Analyzer

• 10 Hz to 26.5 GHz;
• 25 MHz (standard) analysis bandwidth; optional 40 MHz analysis bandwidth

Precission LCR Meter

• 75 kHz to 30 MHz in 100 Hz steps
• High-speed measurements: 30 ms/meas

Multi UE Tester

• Multi-format test for GSM/GPRS/E-GPRS, W-CDMA, cdma2000®, 1xEV-DO, and HSDPA formats

Mixed Signal Oscilloscope

• 100 MHz Bandwidth
• 4 analog channels + 16 time-correlated digital channels
• 2 GSa/s sample rate
• Standard 8 Mpts MegaZoom III deep memory

Two Channel High speed source

• Perform high-speed, dc parametric measurements
• +/- 100 Volt and +/- 200 milliamp output capability (MPSMU)
• +/- 200 Volt and +/- 1 Amp output capability (HPSMU)

Pulse/ pattern Generator

• 400/660 MHz single- or dual-channel pulse data generator 400 MHz, 3.8 V, 50 O into 50 O (81131A) OR 660 MHz, 2.5 V, 50 O into 50 O (81132A)
• Pulse, burst, pattern modes selectable

PCB Prototyping machine

• High speed (60,000 rpm), highest resolution (0.5 μm) and repeatability (± 0.001 mm); Automatic 15-position tool changer; Automatic milling width adjustment; Optical fiducial recognition

3D Printer

• Polyjet Technology
• Nine model materials ranging from rigid opaque to simulated polypropylene

PCB Printer

• Multi-functional circuit printer for printing, soldering, reflow and drilling
• 0.65mm pin-to-pin pitch; integrated 550W heater; 3 mil runout drilling

High Gain Horn Antennas

• 800 MHz to 18 GHz range
• Gain 5 dBi to 14 dBi (typ.)